Displaying An Initiator/Target Accessibility - HP StorageWorks 2/16 - SAN Switch Manual

On original page 246, after the section "Creating a Configuration Analysis Report,"
add the following section:

Displaying an Initiator/Target Accessibility

1. Access the Zone Administration window. See
2. Select the Config tab.
3. Select a Configuration to be analyzed from the Name drop-down menu.
4. Click the Device Accessibility button.
5. Select devices you want displayed in the accessibility matrix; you can select the radio
6. Click OK.
On original page 267, delete the entire section "Web Tools and Netscape on Solaris."
Fabric OS 3.x Document Addendum
Window" for more information.
The Initiator/Target Accessibility Matrix for Config- Device Selection dialog box opens.
button for all devices in the fabric or for a subset of the devices.
If you select a subset, you must click the devices from the Select Devices list and then
click Add to move them to the Evaluate for Accessibility list.
The Initiator/Target Accessibility Matrix opens. You can mouse over a target to display
the symbolic name of the device. You can click a WWN to launch the device view for that
device. You can also right-click the device nodes and click View Device Detail to display
the Device Detail view, which launches a window displaying detailed information about
the selected device.
Advanced Web Tools user guide
"Accessing the Zone Administration
71