Zoneobjectrename - HP StorageWorks 2/16 - SAN Switch Manual

Fabric OS reference guide

zoneobjectrename

Renames a zone object.
Syntax
zoneobjectrename "objectName", "newName"
Availability
Admin
Description
Use this command to rename a zone object. You can use this command for all zone object
types, including CFG, zone, and alias.
A zone configuration name must begin with a letter and can be followed by any number of
letters, numerals, and underscores. Names are case sensitive; for example, Cfg_1 and cfg_1
are different zone configurations. Spaces are ignored.
This command changes the defined configuration. For the change to be preserved across
switch reboots, it must be saved to nonvolatile memory, using the
the change to become effective, an appropriate zone configuration must be enabled, using the
cfgenable
See the
Note:
command can be issued only from the primary FCS switch.
Operands
This command has the following required operands:
objectName
newName
Example
To create a configuration containing three zones:
switch:admin> cfgShow "*"
cfg:
switch:admin> zoneObjectRename "USA_cfg", "UK_cfg"
switch:admin> cfgShow "*"
cfg:
236
command.
command for more information on name and member specifications.
zonecreate
This command requires an Advanced Zoning license. When security is enabled, this
The name of the object that you want to rename.
The new name of the object.
USA_cfg Red_zone; White_zone; Blue_zone
UK_cfg Red_zone; White_zone; Blue_zone
command. For
cfgsave
Fabric OS 3.x Document Addendum