Snmpmibcapset - HP StorageWorks 2/16 - SAN Switch Manual

snmpmibcapset

Modifies options for configuring SNMP MIB trap capability.
Syntax
snmpmibcapset
Availability
Admin
Description
Use this command to turn on or off certain MIBs and traps. This command also enables a user
to turn on or off group information and SSN in SW trap messages. It first displays current
settings and then prompts the user to change the values for each parameter.
The
SNMP agent in the switch:
FA-MIB
SW-TRAP
FA-TRAP
SW-EXTTRAP
Note:
along with other SNMP agent configuration.
The values can be changed, if a user downloads the configuration data through the
configdownload
All the new values successfully configured by the snmpmibcapset command take effect
immediately.
If SNMP MIB is disabled, corresponding traps are disabled also. If any trap group is disabled,
corresponding individual traps are disabled also.
The FE and SW MIBs are always accessible. The snmpmibcapset command does not prompt the
user to turn on or off these MIBs.
Fabric OS 3.x Document Addendum
command displays the SNMP MIBs and TRAPs Capability of the
snmpmibcapshow
Specifying yes means the user can access FA-MIB variables with an
SNMP manager. The default value is yes.
Specifying yes means the SNMP management application can receive
SW-TRAPS from the switch. The default value is yes. Users can also
turn on or off individual SW traps. The individual SW traps are
swFCPortScn, swEventTrap, swFabricWatchTrap, and
swTrackChangesTrap.
Specifying yes means the SNMP management application can receive
FA-TRAPS from the switch. The default value is yes. Users can also
turn on or off individual FA traps. The individual FA traps are
connUnitStatusChange, connUnitEventTrap,
connUnitSensorStatusChange, and connUnitPortStatusChange.
Specifying yes means user can receive SSN in the SW traps. The
default value is no.
The agtcfgdefault command also resets the SNMP MIB and trap capability to default
command.
Fabric OS reference guide
217