Advanced Web Tools user guide
7. Select the Upload/Download subtab.
8. Select the Config Download to Switch radio button.
9. Enter the User Name, Password, and Host IP information.
10. Enter the name of the config file with a fully qualified path.
11. Click Apply.
12. Enable the switch.
On original page 132, under the heading "Routing (FSPF Route) Tab Example," replace
original Figure 29, "Routing (FSPF Route) Tab," with the following:
Figure 17: Routing (FSPF Route) Tab
44
You can monitor the progress by looking at the Upload/Download Progress bar on the
Configure tab.
Fabric OS 3.x Document Addendum