HP StorageWorks 2/16 - SAN Switch Manual page 32

Advanced Web Tools user guide
Delete the following row:
Permissions
And replace it with these two rows:
Access Control
Trap Level
On original page 111, under the heading "Using the SNMP Tab to Set Trap Levels,"
replace step 4 with the following:
6. For each recipient, select a Trap level from the pull-down menu. The level you select
32
Displays the read/write access of a particular community string.
READ ONLY access means that a member of a community string has
the right to view, but cannot make changes. READ/WRITE access
means that a member of a community string can be both viewed and
make changes.
Displays the read/write access of a particular community string.
READ ONLY access means that a member of a community string has
the right to view, but cannot make changes. READ/WRITE access
means that a member of a community string can be both viewed and
make changes.
Use to set the severity level of switch events that prompt SNMP traps.
Default is 0.
refers to the Event level that prompts a trap. See "About the Switch Events Button."
Fabric OS 3.x Document Addendum