Displaying Zone Members Of A Device - HP StorageWorks 2/16 - SAN Switch Manual

3. Select a device from the Domain column and then click Detail View.

Displaying Zone Members of a Device

To display the Zone Members of a particular device:
1. Access the Switch Explorer view.
2. Select the Name Server icon in the Fabric Tool Bar.
3. Select a device from the Domain column and then click Accessible Devices.
On original page 204, under the heading "Using the Zone Administration Window,"
add the following information:
The information in the Zone Admin module is collected from the selected switch. The Zone
Admin icon is displayed in the Fabric Toolbar only if a Zoning license is installed on the
switch. If secure mode is enabled, Zoning can be administered only from the primary FCS
switch. If the selected switch has a Zoning license installed but is not the primary switch, the
Zone Admin icon is displayed in the Fabric Toolbar but not activated.
For specific information regarding secure fabrics, refer to the HP StorageWorks Secure Fabric
OS Version 1.0 User Guide.
When you click the Zone Admin icon from the Fabric Toolbar, you must log in as an admin to
launch the Zone Admin module. A live snapshot is taken of all the zoning configurations at the
time you launch the Zone Admin. To update the information displayed in the Zone Admin
module from the switch zone database, see
When using a mixed fabric—that is, a fabric containing v4.x, v3.x, and v2.x switches—you
should use the most advanced switches to control the fabric. For example, use the v4.x
switches as the Primary FCS, the location to perform zoning tasks, and the time server (CLI).
You should also use the most recently released firmware on your switches.
Fabric OS 3.x Document Addendum
The Name Server Information dialog box displays information specific to that device.
The Name Server window opens.
The Zone Accessible Devices dialog box displays accessible zone member information
specific to that device.
Caution: Any changes you make in the Zone Admin module are held in a buffered
environment and do
Zone Admin module without saving your changes, your changes are lost. To save the
buffered changes you make in the Zone Admin module to the zoning database on the
switch, see "Saving Changes to an Existing Configuration."
"Refresh Zoning."
not
update the zoning database until you save them. If you close the
Advanced Web Tools user guide
63