HP StorageWorks 2/16 - SAN Switch Manual page 224

Fabric OS reference guide
Examples
The following example displays a 16-port switch. Two ports are F_Ports (point-to-point
connections to N_Ports), two ports are loop ports (one of which has eight private loop
devices), and two ports are connected to another switch, sw6. If the optional -portcount
operand is used, only the number of ports is displayed.
switch:admin> switchShow
switchName:
switchType:
switchState:
switchRole:
switchDomain:
switchId:
switchWwn:
switchBeacon:
Zoning:
port
port
port
port
port
port
port
port
port
port
port 10: -- AN No_Module
port 11: -- AN No_Module
port 12: sw AN No_Light
port 13: id 2G Online
port 14: -- AN No_Module
port 15: id 2G Online
(Trunk master)
To display the number of ports on the switch:
switch:admin> switchShow "-portcount"
ports=16
See Also
portcfgdefault
portcfgeport
portcfggport
portcfgislmode
portcfglongdistance
portcfglport
portcfgpersistentdisable
portcfgpersistentenable
portcfgshow
224
sw5
2.1
Online
Subordinate
1
fffc01
10:00:00:60:69:00:00:0b
OFF
ON (c1)
0: sw 2G Online
1: sw AN No_Light
2: sw 2G Online
3: sw N2 In_Sync
4: -- AN No_Module
5: -- AN No_Module
6: cu 1G No_Light
7: cu 1G Online
8: id AN No_Light
9: -- AN No_Module
F-Port 20:00:00:20:46:30:48:38
F-Port 10:00:00:e0:69:00:02:b1
L-Port
L-Port 8 private, 2 phantom
E-Port (Trunk port, master is port #15)
E-Port 10:00:00:60:69:00:60:10 "sw6" (upstream)
Fabric OS 3.x Document Addendum