Adding A Wwn In The Zoning Database; Deleting A Wwn In The Zoning Database - HP StorageWorks 2/16 - SAN Switch Manual

2. Use one of the following methods to identify the most recently effective Zone
Both of these actions display the Effective Configuration dialog box. If no zone is enabled, a
message is displayed, indicating that there is no active zoning configuration on the switch.
On original page 208, in the section "Adding a WWN in the Zoning Database," replace
the following heading:

Adding a WWN in the Zoning Database

With this heading:
Adding a WWN to Zoning Entities
Add the following step to the procedure:
5. The WWN is added to the Zone Admin buffer and can be used as a member.
On original page 208, in the section "Deleting a WWN in the Zoning Database,"
replace the following heading:

Deleting a WWN in the Zoning Database

With this heading:
Deleting a WWN in Zoning Entities
Add the following step to the procedure:
5. The WWN is deleted from the Zone Admin buffer.
Fabric OS 3.x Document Addendum
Caution: Clicking the Refresh icon in the lower right corner of the Zone Admin window
overwrites all local unsaved zoning changes. If anyone has made any changes to the
Zones outside of your Zone Admin session, those changes are applied.
configuration without saving or applying any changes you have made in the Zone Admin
module:
Click File > View Effective Configuration in the Zone Admin window.
Click the enabled configuration icon in the Zone Admin window.
Advanced Web Tools user guide
65