Nokia IP350 - Security Appliance Installation Manual page 42

4
Installing and Replacing Network Interface Cards
7. Insert the new NIC or blank bezel.
If you are removing a NIC without installing another NIC:
a. Insert a blank bezel into the front panel slot formerly occupied by the
b. Proceed to
If you are installing or replacing a NIC, insert the NIC.
a. Insert the NIC bezel into the front panel.
b. Gently push the back of the NIC down toward the chassis assembly.
42
NIC and push it gently into place.
Make sure that the bezel is completely seated into the front panel and
that the screw holes on the bottom of the bezel align with those in the
front panel.
step 9.
Make sure that the NIC edge is completely seated into the connectors
on the chassis assembly.
Nokia 60s and 100s Installation Guide
00256a