Connecting Power And Turning The Power On; Figure 9 Back Panel Power Switch - Nokia IP350 - Security Appliance Installation Manual

Caution
Blocking ventilation openings during installation may result in
damage to the appliance.

Connecting Power and Turning the Power On

The power plug and power switch for the 60s and 100s appliances are located
on the back of the appliance as
Note
The Nokia 60s and 100s appliance power supplies automatically detect
the input voltage (115VAC [90 to 132] or 220VAC [180 to 264]) and
configure themselves appropriately.

Figure 9 Back Panel Power Switch

To connect the power supply
1. Connect the power cord securely into the power socket on the back of the
2. Plug the other end of the cord into a three-wire grounded power strip or
3. Press the power supply switch to the "on" position to activate the 60s and
Nokia 60s and 100s Installation Guide
appliance.
wall outlet.
100s appliance.
Connecting Power and Turning the Power On
Figure 9 shows.
Power switch
00249
Power plug
29