Toshiba GR200 Series Instruction Manual page 1223

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Statistics data (Counter group)

The user can check the counting numbers provided by the general counter function†. Table

9.6-1 shows the user to find the count numbers in the counter group.

Counter number

ARC1 CLOSE COMMAND

ARC2 CLOSE COMMAND

†Note: See Chapter

‡Note: See Chapter

Count information on the screen

The user can see the count number in the counter group. Figure 9.6-1 illustrates the count

numbers provided by the ARC function.

Note: See Chapter

Report setting for GCNT (Dead band feature)

The data collected with the GCNT functions will be sent to the network; thus, the user should

set a regulation value using the SD feature in the GCNT function. See section Setting for the

report (Dead band) in the GCNT function.

Table 9.6-1 Counter data

Origin of info (default)

General control function: Counter function for the general (GCNT)

Relay application: Autoreclose

ARC1 CLOSE COMMAND +

Figure 9.6-1 Example of Counter screen

User interface: Monitoring sub-menu: Statistics sub-menu

ARC function‡

ARC function

(Not assigned)

(Not assigned)

for more information.

6F2S1914 (0.49)

Correspondences

GRL200 (Soft 033 & 037)

Chapters

Table of Contents