Toshiba GR200 Series Instruction Manual page 803

map the input-point to the Object references having attributes CO and CF† . Figure 4.4-16 shows
how to map a signal.
†Note: The attribute is defined in the IEC 61850; "CO" stands for "Control" and "CF"
stands for "Configuration" in the functional constraint (FC).
Table 4.4-6 Mapping signals required for SPCSO object of GGIO3302
Object_reference
Ctrl/GGIO3302$SPCSO1$Oper
Ctrl/GGIO3302$SPCSO1$Oper
Ctrl/GGIO3302$SPCSO1$Oper
Ctrl/GGIO3302$SPCSO1$Oper
Ctrl/GGIO3302$SPCSO1$Oper
Ctrl/GGIO3302$SPCSO1$Oper$origin
Ctrl/GGIO3302$SPCSO1$Oper$origin
Ctrl/GGIO3302$SPCSO1
Ctrl/GGIO3302$SPCSO1
Check "Input"
Attribute Type
ctlVal BOOLEAN
ctlNum INT8U
T Timestamp
Test BOOLEAN
Check Check
orCat orCategory
orIdent Octet64
ctlModel ctlModel
sboClass sboClass
Figure 4.4-16 Input-point mapped for GGIO3302
- 780 -
FC Signal Number
CO
CO
CO
CO
CO
529001 700C016D08
CO
CO
CF
CF
6F2S1914 (0.49)
Signal Name
OPTR01_CONTROL_REQ
GRL200 (Soft 033 & 037)