Toshiba GR200 Series Instruction Manual page 1032

device, but a 2 and other devices are also provided in the ASEQ function. We
nd
have omitted the Element IDs and their names for the other devices to improve
readability. Use the rule described below when the user wishes to obtain the
Element IDs and their names for the other devices.
Rule: The same types of signal monitoring points are provided in every device;
hence, the user can find the same ones for all of the other devices. For
example, when the user wishes to find the "ASEQ01_EC_LCD" point for
the 2 device, use the description of "ASEQ02_EC_LCD" in place of
nd
"ASEQ01_EC_LCD". The user can obtain the ID value of
"ASEQ02_EC_LCD" by using the following steps:
Step 1
Step 2
Step 3
Step 4
Find the element ID for ASEQ01_EC_LCD (i.e.,
"800D011D58")
Identify the number at the fifth digit from the ID. (i.e., "1")
Choose a new device number. (i.e., pick the number "2" for
the 2 device)
nd
Replace the number that occurs at the fifth digit with the
new device number. (i.e., get new ID "800D021D58" of
"ASEQ02_EC_LCD") The ID is expressed in hexadecimal
notation. Thus, the user must change the device number
from decimal notation to hexadecimal notation.
- 1009 -
6F2S1914 (0.49)
GRL200 (Soft 033 & 037)