Toshiba GR200 Series Instruction Manual page 1326

Supervision tasks for device dependent features
Displaying errors regarding to special problems are summarized in Table 10.2-1; the error is
cleared when recovered
Table 10.5-1 Supervision items and error levels for device-dependent
Sec. Supervision items(Screen message)
No.
10.5.1 Error detection of differential current in DIF (Id)
10.5.2 Current transformer failure detected with DIF (DIF-CT)
10.5.3 Synchronizing and sampling error (Com sync fail)
10.5.4 Communication failure (Com fail)
10.5.5 Error signal level for sending (TX level)
10.5.6 Error signal level for receiving (RX level)
10.5.7 Propagation delay error (Com Td)
10.5.8 Error terminal configuration (Term ID)
10.5.9 Monitoring ready state at the remote (Term rdy)
10.5.10 Transmission error (Com fail-R)
10.5.11 Master-slave monitoring (MSCHK)
10.5.12 Supervision of Relay ID (RYID)
─────────────────────────────────────────────────────────────────
Note: The implementation of particular features is dependent upon the selection of
hardware and the configuration of functions. Several IED models do not support certain
features. To determine whether a particular feature has been implemented within an IED,
identify the IED ordering number; and check the order number for the "G&T position" whilst
referring to the comparison table below. For more information, see
Table 10.5-2 Comparative table in respective ordering numbers
Sec.
–
✓: Applicable
Feature
Device dependent supervision tasks
NA: Not applicable
- 1303 -
6F2S1914 (0.49)
Detailed
Info.
N/A
N/A
N/A
N/A
N/A
N/A
Displayed
N/A
N/A
N/A
N/A
Displayed
Appendix: Ordering
Ordering No. at "G&T"
33 37
✓ ✓
GRL200 (Soft 033 & 037)
ERROR
LVL. LED
3 On
3 On
2 On
2 On
3 On
3 On
3 On
2 On
2 On
2 On
2 On
2 On
.