Counter: Out C - Mitsubishi Electric MELSEC Q Series Programming Manual

5 SEQUENCE INSTRUCTIONS FOR MOTION CPU

5.3.5 Counter: OUT C

Setting
data
X Y M
Device
Setting Value
[Instruction]
OUT C
OUT C
[Function]
Bit device
SM F T C D
(1) When the operation results up to the OUT instruction change from OFF to ON, 1
is added to the present value (count value) and the count up status (present value
≥ set value), and the contacts respond as follows:
A Contact
B Contact
(2) No count is conducted with the operation results at ON. (There is no need to
perform pulse conversion on count input.)
(3) If the operation results change from OFF to ON after the count up status (present
value ≥ set value) , the contact will remain unchanged and the current value will
be increment.
(-32768 → ...... → 0 → 1 → ...... → 32767 → -32768 )
(4) A negative number (-32768 to -1) cannot be set as the setting value for the timer.
If the set value is 0, the processing is identical to that which takes place for 1.
Usable device
Word device
W T C SD Z
Continuity
Non-continuity
5 - 21
Constant Pointer Level
K H P N
Setting value
(1 to 32767 is valid)
K50
C0
Setting value
(1 to 32767 is valid for
D1560
the data register details)
C0
Digit
desig- Index
nation
: Usable