Toro 500 EFI Service Manual page 152

2. Using a T-40 torx wrench, remove the cap screws
securing the differential cover. Account for and make
note of the ID tag location for assembling purposes.
3. Using a plastic mallet, tap lightly to remove the dif-
ferential cover. Account for an O-ring.

NOTE: If the cover is difficult to remove, pry on the
cover in more than one recessed location.
4. Remove the splined coupler, shifter fork, pin, and
spring of the differential lock assembly and set aside.
Note position of parts for assembling purposes.
150
GC015
5. Remove the left differential bearing flange assembly
and account for a shim. Mark the shim as left-side.
GC003
6. Place the differential with the open side down; then
lift the housing off the spider assembly. Account for
shim(s) and mark as right-side.
KX174
KX175
KX177
KX178
KX179