Lubrication Points; Air Inlet Pre-Filter; Air Filter - Toro 500 EFI Service Manual

Lubrication Points

It is advisable to lubricate certain components periodi-
cally to ensure free movement. Apply light oil to the
components using the following list as reference.
A. Accelerator Pedal Pivot/Cable Ends
B. Brake Pedal Pivot
C. Shift Cable

Air Inlet Pre-Filter

This vehicle is equipped with a foam pre-filter to filter
dirt from the inlet air prior to reaching the main air filter.
1. Raise the cargo box; then gently squeeze the pre-fil-
ter cover and lift it up to expose the pre-filter.
2. Loosen the clamp securing the pre-filter.
2. Remove the pre-filter assembly and wash thoroughly
in warm, soapy water; then rinse and dry.
3. Install and secure with the clamp. Tighten securely;
then with the pre-filter cover installed, lower the
cargo box.
8
Failure to inspect the air filter frequently if the vehicle is
used in dusty, wet, or muddy conditions can damage
the engine.

NOTE: To access the air filter, raise the cargo box.
1. Remove dirt and debris from around the filter hous-
ing.
2. Unsnap the four spring-clip fasteners and remove the
air filter cover.
3. Remove the two knobs securing the filter; then
remove the metal hold-down and filter.
HDX237A
4. Fill a wash pan larger than the element with a soapy
water; then dip the element in the soapy water and
wash it.
5. Squeeze the element by pressing it between the
HDX235 palms of both hands to remove excess soapy water.
Do no twist or ring the element or it will tear.
6. Dry the element.
7. Put the element in a plastic bag; then pour in air filter
oil and work the oil into the element.

Air Filter

CAUTION
HDX050A
HDX226A