Toro 500 EFI Service Manual page 150

2. Using a rubber mallet, remove the housing. Account
for a gasket. Remove the fork, collar, and spring.
Note the location of all the components for assem-
bling purposes.
3. Remove the snap rings from the input shaft; then
remove the input shaft from the pinion housing.
148
4. Using a seal removal tool, remove the input shaft
seal. Account for a spacer.
GC004A
5. Remove the snap ring securing the input shaft bear-
ing; then place the pinion housing in a press and
remove the bearing.
GC015
CD106
GC009A
GC010
GC011
AF984
KX219