Table of Contents
Advertisement
• FQXSPBR400CI: Management Controller [arg1]: cloning configuration from neighbor server [arg2]
by group name [arg3] failed to start.
This message is for the use case where a user synchronizes a Management Controller configuration by
Federation and the restoration fails to start.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0258
User Action:
Information only; no action is required
• FQXSPBR400DI: Neighbor group clone configuration was initiated by user [arg1].
This message is for the user initiated a Federation clone configuration.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0259
User Action:
Information only; no action is required
• FQXSPBR400EI: Neighbor group firmware update was initiated by user [arg1].
This message is for the user started a Federation update.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0260
User Action:
Information only; no action is required
• FQXSPBR400FI: The neighbor group management is [arg1] by user [arg2] from [arg3] at IP address
[arg4].
Neighbor group management is enabled or disabled by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0272
User Action:
Information only; no action is required
.
Chapter 2
XClarity Controller events
29
Advertisement
Table of Contents
