Table of Contents
Advertisement
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0495
User Action:
Information only; no action is required
• FQXSPPW2063I: Sensor [SensorElementName] has transitioned to a less severe state from critical.
This message is for the use case when an implementation has detected a Sensor transition to less severe
from critical.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Voltage
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0523
User Action:
Information only; no action is required
• FQXSPPW4001I: PCIe Power Brake for [arg1] has been [arg2].
This message is for the use case where PCIe Power Brake.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0243
User Action:
Information only; no action is required
• FQXSPPW4002I: Total graphics power value has exceeded the pre-configured limit.
This message is for the use case where total graphics power value value has exceeded the pre-configured
limit.
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: IMM CIM ID: 0328
User Action:
Information only; no action is required
• FQXSPPW4003I: The customized total graphics power is within the pre-configured limit.
This message is for the use case where the customized total graphics power is within the pre-configured
limit.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
.
Chapter 2
XClarity Controller events
97
Advertisement
Table of Contents
