Table of Contents
Advertisement
Chapter 5. FPC events
The following events can be viewed from the FPC web interface.
For each event code, the following fields are displayed:
Event identifier
An identifier that uniquely identifies an event.
Event description
The logged message string that appears for an event.
Explanation
Provides additional information to explain why the event occurred.
Severity
An indication of the level of concern for the condition. The severity is abbreviated in the event log to the
first character. The following severities can be displayed:
• Informational/ Normal. The event was recorded for audit purposes, usually a user action or a
change of states that is normal behavior.
• Warning. The event is not as severe as an error, but if possible, the condition should be corrected
before it becomes an error. It might also be a condition that requires additional monitoring or
maintenance.
• Critical . The event is a failure or critical condition that impairs service or an expected function.
Serviceable
Specifies whether user action is required to correct the problem.
User response
Indicates what actions you should perform to solve the event. Perform the steps listed in this section in
the order shown until the problem is solved. If you cannot solve the problem after performing all steps,
contact Lenovo Support.
List of fan power control (FPC) error codes
This section details the fan power control (FPC) error codes.
• 02 : EvtLogDisabled: Event Logging Disabled sensor, Log Area Reset/Cleared was asserted.
FPC system event log is cleared.
Severity
Normal
Serviceable
Automatically notify support
User Action
1. N/A
• 03 : EvtLogDisabled: Event Logging Disabled sensor, system event log full was asserted
Warning is asserted when system event log is at least 75% full. Error is asserted when System Event Log
is 100% full.
© Copyright Lenovo 2019, 2022
209
Advertisement
Table of Contents
