Table of Contents
Advertisement
1. Make sure that the node configuration meet the power limitation of current power supply
configuration.
2. Make sure that there is no mismatch of PSU nor non-supported PSU installed.
• C1 : Failsafe_No_Perm
Power permission retrieved from node due to node BMC not responsive for at least 7 minutes.
Severity
Warning
Serviceable
Automatically notify support
User Action
Complete the following steps:
1. Reseat node one time. If node bmc heartbeat is not blinking, replace the node.
• C2 : Node_Reseat_User
User performed virtual reseat operation on indicated node.
Severity
Info
Serviceable
Automatically notify support
User Action
1. No user action needed.
• C3 : Node_Reset_User
User performed virtual reset operation on indicated node.
Severity
Info
Serviceable
Automatically notify support
User Action
1. No user action needed.
• C4 : Node_No_Present
Node is not installed in the indicated slot.
Severity
Info
Serviceable
Automatically notify support
User Action
1. No user action needed.
• C5 : Node_DC_OFF
242
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference
Advertisement
Table of Contents
