Table of Contents
Advertisement
Warning
Serviceable
Automatically notify support
User Action
1. Make sure that there is no mix of PSUs, no non-supported PSU installed, nor 1300w PSUs
connected to 110v AC outlet.
• D1 : Nodes_Power_2Big
Sum of all running nodes' maximum power consumption is larger than power bank provided by PSUs.
System could enter overloading condition.
Severity
Warning
Serviceable
Automatically notify support
User Action
1. Make sure all power supplies power cord are properly installed. Check if AC power is stable.
2. Make sure that all power supplies are in healthy condition.
3. Make sure that the node configuration meet the power limitation of current power supply
configuration.
• D2 : Throttle_OUT_FPC
All nodes throttled due to PSU unbalance or OT warning conditions.
Severity
Warning
Serviceable
Automatically notify support
User Action
1. Make sure all power supplies power cord are properly installed. Check if AC power is stable.
2. Make sure that all power supplies are in healthy condition and there is no unbalanced
configuration.
3. Check event log for PS#_OT_Warning or PSU_Unbalance entry. Follow the user action of found
event to correct fault condition.
• D3 : FPC_REBOOT
FPC was manually rebooted with hardware reset button, IPMI warm reboot command, or FPC web
operation.
Severity
Info
Serviceable
Automatically notify support
User Action
1. No user action needed.
246
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference
Advertisement
Table of Contents
