Table of Contents
Advertisement
Automatically notify support
User Action
1. Make sure that all ten fans are installed. If all fans are confirmed to be present, reseat fan
modules. If event persists after fan module reseat, replace fan modules.
• BA : FAN09_No_Present
Indicated fan module is missing from fan bay or not properly installed.
Severity
Critical
Serviceable
Automatically notify support
User Action
1. Make sure that all ten fans are installed. If all fans are confirmed to be present, reseat fan
modules. If event persists after fan module reseat, replace fan modules.
• BB : FAN10_No_Present
Indicated fan module is missing from fan bay or not properly installed.
Severity
Critical
Serviceable
Automatically notify support
User Action
1. Make sure that all ten fans are installed. If all fans are confirmed to be present, reseat fan
modules. If event persists after fan module reseat, replace fan modules.
• BC : Zone %_FAN_FFS
All system fans in indicated zone are running in full speed.
Severity
Warning
Serviceable
Automatically notify support
User Action
Complete the following steps:
1. Make sure that room temperature is maintained at required level.
2. Make sure that all fan modules are installed and operating properly.
• BD : Zone %_PSU_FFS
All power supply fans in indicated zone are running in full speed.
Severity
Warning
Serviceable
Automatically notify support
240
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference
Advertisement
Table of Contents
