of shims in adjacent holes if more than 1
shim is added to any 1 hole location.
9.
Adjust the idler pulley and install the belt covers.
Cab Maintenance
Cleaning the Cab
Important:
Use care around the cab seals and
lights
(Figure
133). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
1. Seal
2. Light
Cleaning the Cab Air Filters
Service Interval: Every 250 hours
1.
Remove the screws and grates from both the
in-cab and rear cab air filters
Figure
135).
89
Figure 133
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
(Figure 134
g034330
and