Table of Contents
Advertisement
Cab Maintenance
Cleaning the Cab
Important:
Use care around the cab seals and
lights
(Figure
92). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
Figure 92
1. Seal
2. Light
Cleaning the Cab Air Filters
Service Interval: Every 250 hours
1.
Remove the screws and grates from both the
in-cab and rear cab air filters
Figure
94).
g034330
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
(Figure 93
and
1. Filter
2. Grate
Rear Cab Air Filter
1. Filter
2. Grate
2.
Clean the filters by blowing clean, oil-free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace the filter.
3.
Install the filters and the grate with the
thumbscrews.
71
Figure 93
In-Cab Air Filter
3. Screw
Figure 94
3. Screw
g028378
g028379
Advertisement
Table of Contents
