Table of Contents
Advertisement
Figure 58
Important:
Perform a recovery regeneration
to restore the PTO function; refer to
to Perform a Parked or Recovery Regeneration
(page 50)
and
Performing a Parked or Recovery
Regeneration (page
50).
Note:
The Home screen displays the PTO disabled
Icon; refer to
Figure 55
Messages (page
49).
DPF Status-Limitation
•
If the engine computer requests a recovery
regeneration or is processing a recovery
regeneration and you scroll down to the P
R
option, parked regeneration locks and the
EGEN
lock icon
(Figure
59) appears in the lower right
corner of the InfoCenter.
Figure 59
•
If the engine computer has not requested a
recovery regeneration and you scroll down
to the R
R
ECOVERY
regeneration locks and the lock icon
appears in the lower right corner of the InfoCenter.
Figure 60
Preparing
in
Parked Regeneration
option, the recovery
EGEN
(Figure
Preparing to Perform a Parked or Recovery
Regeneration
1.
Ensure that the machine has fuel in the tank for
the type of regeneration you are performing:
•
Parked Regeneration: Ensure that you
g224399
have 1/4 tank of fuel before performing the
parked regeneration.
•
Recovery Regeneration: Ensure that you
have 1/2 tank of fuel before performing the
recovery regeneration.
2.
Move the machine outside to an area away from
combustible materials.
3.
Park the machine on a level surface.
4.
Ensure that the traction control or motion-control
levers are in the N
5.
If applicable, shut off the PTO, and lower the
cutting units or accessories.
6.
Engage the parking brake.
7.
Set the throttle to the low I
ARKED
Performing a Parked or Recovery
Regeneration
CAUTION
The exhaust temperature is hot (approximately
600°C (1,112°F) during DPF regeneration. Hot
exhaust gas can harm you or other people.
• Never operate the engine in an enclosed
area.
g224625
• Make sure that there are no flammable
materials around the exhaust system.
• Never touch a hot exhaust system
component.
• Never stand near or around the exhaust
60)
pipe of the machine.
Important:
DPF regeneration if you increase the engine speed
from low idle or release the parking brake.
1.
Access the DPF Regeneration menu, press
the center button to scroll down to either the
P
ARKED
R
EGEN
right button to select the start the regeneration
g224628
(Figure
50
position.
EUTRAL
DLE
The computer of the machine cancels
R
S
option or the R
EGEN
TART
S
option
(Figure
61), and press the
TART
61).
position.
ECOVERY
Advertisement
Table of Contents
