Cab Maintenance; Filling The Washer Fluid Bottle; Cleaning The Cab Air Filters - Toro Groundsmaster 360 Operator's Manual

Cab Maintenance

Filling the Washer Fluid Bottle

1. Stop the machine on a level surface, stop the engine,
set the parking brake, and remove the ignition key.
2. Open the hood.
3. Locate the washer fluid bottle
Figure 51
Washer Fluid Bottle with Washer Fluid Symbol
4. Fill the bottle with washer fluid as needed.
5. Close the hood.

Cleaning the Cab Air Filters

Service Interval: Every 250 hours (Replace them if they are
torn or excessively dirty.)
1. Remove the screws and grates from over both the
in-cab and rear cab air filters
(Figure 51).
(Figure 52).
1
1. Filter
2. Grate
1. Filter
2. Grate
2. Clean the filters by blowing clean, oil free, compressed
air through them.
Important: If either filter has a hole, tear, or other
damage, replace it.
3. Install the filters and grate, securing them with the
thumb screws.
46
3
Figure 52
3. Screw
1
2
3
Figure 53
3. Screw
2
g028378
2
g028379