Adding Rear Weight - Toro Groundsmaster 3300 Operator's Manual

17

Adding Rear Weight

Parts needed for this procedure:
Weight—19 kg (42 lb) [amount varies per your model]
Weight—6 kg (15 lb) [amount varies per your model]
1 Weight Bracket Kit (if necessary)
Weight—11 kg (25 lb) [amount varies per your model]
Refer to the following table for the weight that is shipped with each machine:
Model
31900
31901
31907
31909
Determining the Required Rear Weight
Ensure that your machine has the minimum amount of rear weight per your traction unit and attachment
combination. For Models 31900, 31901, and 31907, you can also add more rear weight for improved slope
performance.
•
To determine the minimum number of weights required, refer to the
(page 23) table.
•
To achieve an improved slope performance, add the number of each weight type as listed in the
Rear Weight for Improved Slope Performance (page 25)
To ensure proper ROPS performance, do not add more weight than what is listed in this table.
Note:
If you have an equipped CE Kit, refer to the kit Installation Instructions for the appropriate slope decal for
your traction unit and attachment combination. Ensure that the correct amount of rear weight is added (i.e.,
weight to meet required slope standard or weight to meet improved slope performance).
Shipped Rear Weight
2 weights (19 kg or 42 lb each)
1 weight (19 kg or 42 lb)
0 weights
5 weights (19 kg or 42 lb each) and 2 weights (6 kg or 15 lb each)
Minimum Required Rear Weight
table.
22
Required