Installing The Lift-Arm Assembly - Toro Groundsmaster 3300 Operator's Manual

4
Installing the Lift-Arm
Assembly
Models 31900, 31901, and 31907
Only
Parts needed for this procedure:
1 Right lift arm
1 Left lift arm
2 Large pin
2 Bolt (3/8 x 2-3/4 inches)
6 Nut (3/8 inch)
2 Small pin
1
Sensor bracket
2 Carriage bolt
2 Bolt (3/8 x 1-1/4 inches)
2 Grease fitting
Procedure
Note:
Have an assistant help you to install the lift
arms, as needed.
1. Remove the lift arms from the shipping skid.
2. Use 2 large pins to install the lift arms to the
machine frame (Figure
Right side shown.
1. Lift arm
2. Machine frame
6).
Figure 6
3. Large pin
4. Grease fitting
3. Install the grease fittings to the large pins
6).
4. Use 2 nuts (3/8 inch) and 2 bolts (3/8 x 2-3/4
inches) to secure the large pins to the frame
(Figure 7).
1. Nut
2. Large pin
5. Use 2 carriage bolts and 2 nuts (3/8 inch) to
secure the sensor bracket to the right lift arm
(Figure 8).
Note:
Ensure that the sensor bracket does not
interfere with the sensor.
g312023
1. Sensor bracket
2. Carriage bolt
14
Figure 7
Right side shown
3. Bolt
Figure 8
Right side shown
3. Nut (3/8 inch)
(Figure
g295767
g312028