Starting The Inverter; Powering On Loads - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)

4.1.2.2 Starting the Inverter

UPS System User List
Table 4-1 UPS system user list
Default User
admin (administrator)
operator (common user)
Starting the Inverter on the LCD
Step 1 Choose Common Functions > Inv. ON.
Step 2 In the displayed login screen, select a user name and enter the password.
Step 3 In the displayed dialog box, tap Yes to start the inverter.
----End

4.1.2.3 Powering On Loads

After the inverter starts, the UPS works in normal mode. The Bypass mode alarm
disappears. Check that the UPS has transferred to normal mode by viewing the
system running status diagram.
Procedure
Step 1 After confirming that the battery strings are properly connected, turn on the
battery string input switch. If there are multiple battery strings, turn on the switch
for each battery string and then the general switch between battery strings and
the UPS. After you turn on the battery string input switch, the No battery alarm
disappears.
Step 2 Turn on the UPS output circuit breaker QF3.
After the UPS is started for the first time, perform a battery capacity test to ensure
that battery parameters are correctly displayed.
Step 3 (Optional) Turn on the lighting output circuit breaker on the integrated UPS and
check whether the PWR indicator on the AC actuator lights up. Press down the
lighting button to power on the light.
Issue 02 (2022-12-15)
NO TE
You can also start the inverter by choosing System Info > Maintenance > Inv. ON.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
Preset Password
000001
000001
4 Commissioning Core Devices
Permission Description
Can set all the menus.
Can only view
parameters and set some
parameters.
36