Setting Management System Parameters - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)

4.7.3.1 Setting Management System Parameters

Procedure
Step 1 Apply for a fixed IP address to the equipment room network administrator.
Step 2 Set the IP address, subnet mask, and default gateway on the ECC800-Pro WebUI.
Table 4-10 IP parameters
Path
System
Settings >
System
Parameter
s >
Monitor IP
> WAN_1
Step 3 Click Submit.
Step 4 Set management system communications parameters and authentication
password on the ECC800-Pro WebUI.
Table 4-11 Management system parameters
Path
System
Settings >
NMS
Application
> NetEco >
Communicat
ion
Parameters
Issue 02 (2022-12-15)
Parameter
IP
Subnet
mask
Default
gateway
Parameter
Server IP
Port number
Network port
for link setup
Copyright © Huawei Digital Power Technologies Co., Ltd.
Default Setting
Value
192.168.8.1 Set this parameter based on the IP
0 address assigned by the network
administrator.
255.255.25 Set this parameter based on the
5.0 subnet mask assigned by the network
administrator.
192.168.8.1 Set this parameter based on the
default gateway address assigned by
the network administrator.
Default Setting
Value
192.168.8. IP address of the primary
11 management system server
NOTE
The management system IP address
and the ECC800-Pro IP address must be
configured in the same network to
ensure normal connection between the
management system and the ECC800-
Pro.
31220 31220
WAN_1 WAN_1
4 Commissioning Core Devices
61