Huawei NetCol8000-A013 User Manual page 130

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
Figure 5-11 Panel name
(1) Top cover
(3) Side rear panel
Step 3 Use diagonal pliers to cut off the cable ties that secure the control board cables,
and remove the cable terminals from the control board.
Step 4 Remove the cover of the middle liquid cooling cold plate using a Phillips
screwdriver.
Step 5 Use a Phillips screwdriver to remove the bolts that secure the control board, and
Pull out the control board upwards.
Figure 5-12 Removing the control board
(1) Liquid cooling cold plate
Step 6 Install a new control board, and tighten the bolts to secure it.
Issue 04 (2022-11-25)
NO TE
Take a photo before performing this step so that you know how to bind the cable ties and
install the cable terminals later.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 System Operation and Maintenance
(2) Front upper panel
(4) Front lower panel
123