Huawei NetCol8000-A013 User Manual page 107

In-room air cooled smart cooling product
Hide thumbs Also See for NetCol8000-A013:
Table of Contents

Advertisement

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
Alarm
Alarm Name
ID
301
EEV Low
Superheat Degree
Alarm
302
EEV Low
Superheat Lock
Alarm
303
EEV Drive Alarm
304
EEV Drive Lock
Alarm
Issue 04 (2022-11-25)
System
Action
The
compressor
shuts down.
The
compressor
shuts down.
(The alarm
needs to be
manually
cleared.)
The
compressor
shuts down.
The
compressor
shuts down.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 System Operation and Maintenance
Possible Causes
1. The EEV is faulty or
its step is incorrect.
2. The cables to the
EEV are not properly
connected.
3. The EEV coil is
loose.
4. The plug of the EEV
is loose.
5. The plug of the EEV
is short-circuited.
6. The outdoor
temperature sensor
displays an incorrect
temperature or is
faulty.
The EEV Low
Superheat Alarm is
triggered multiple
times within a
specified period of
time.
1. The EEV is not
connected.
2. The EEV coil is
short-circuited.
3. The EEV drive circuit
of the indoor unit
main control board
is faulty.
The EEV Drive Alarm is
triggered multiple
times within a
specified period of
time.
Solution
1. Check and replace
the EEV.
2. Check and replace
the EEV body.
3. Secure the EEV coil.
4. Secure the plug.
5. Eliminate the short-
circuit fault.
6. Adjust or replace
the outdoor
temperature sensor.
Refer to the solution to
the EEV Low Superheat
Alarm.
1. Check the cables to
the EEV.
2. Check whether the
EEV coil is short-
circuited.
3. Replace the main
control board of the
indoor unit.
Refer to the solution to
the EEV Drive Alarm.
100

Advertisement

Table of Contents
loading

Table of Contents