Replacing An Lcd - Huawei NetCol8000-A013 User Manual

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
Take a photo before performing this step so that you know how to bind the cable ties and
install the cable terminals later.
Step 4 Remove the six screws that secure the fan drive board, and remove the fan drive
board.
Step 5 Install the new fan drive board in reverse order.
Step 6 After power-on, tap
confirmation screen displayed. Ensure that the smart cooling product is running
normally without any alarms.
----End

5.4.1.7 Replacing an LCD

Prerequisites
●
●
●
Context
Tool: Phillips screwdriver
Procedure
Step 1 Open the front door.
Step 2 Remove the cables from the LCD.
Step 3 Use a Phillips screwdriver to remove the four screws from the rear of the LCD.
Step 4 Remove the LCD and backplane.
Step 5 Install the new LCD and backplane.
Step 6 Install the LCD cables.
Step 7 Choose Maintenance > USB Wizard > Configuration Import to import historical
data.
Step 8 After the cables are reconnected, the home screen is displayed on the LCD. Check
whether the display is normal.
----End
Issue 04 (2022-11-25)
NO TE
The LCD needs to be replaced.
A spare LCD with the correct software version is available and functional.
Choose Maintenance > USB Wizard > One-Click Export to export historical
data to a USB flash drive.
NO TE
● The USB port of the USB flash drive must comply with the USB2.0 standard.
● The FAT32 USB flash drive (4, 8, 16, or 32 GB) should be used.
● The upgrade file must be stored in the root directory of the USB flash drive.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 System Operation and Maintenance
on the home screen and tap Yes on the start
118