Optional) Setting Monitor Parameters - Huawei NetCol8000-A013 User Manual

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
Step 6 After the setting is complete, tap
----End

4.5 (Optional) Setting Monitor Parameters

Procedure
Step 1 Choose Comm Setting from the user menu, and tap
communication setting screen.
Figure 4-8 Communication settings
Step 2 Set Baud Rate, Comm Address, and Enable Monitoring Resistor based on site
requirements.
Table 4-5 Communication settings
Item
Baud Rate
Comm Address
Enable Monitoring
Resistor
----End
Issue 04 (2022-11-25) Copyright © Huawei Digital Power Technologies Co., Ltd.
to return to the user menu.
Description
Set the baud rate as
required. The value
should be consistent
with that set on the
NMS.
The communications
address in one RS485
NMS must be unique,
which is irrelevant to the
cable connection
sequence or teamwork
address.
In an NMS, the values
for the first and last
smart cooling products
by cable routing are
"Yes".
4 Power-On Commissioning
to access the
Default Value
9600
1
No
78