Table of Contents
Advertisement
I Common procedures for removal and installation of PC boards in the controller
(except for the MTH08C/D)
G Removal procedure
(1) Remove the following cover:
• Upper left-hand side cover
"3. Removing and Installing the Covers"
(2) Remove the PC board brace.
(3) Disconnect the connectors.
REFERENCE
The connectors need to be disconnected from the following PC boards:
• CPU90E: CN6 to CN8, CN11, CN18, and CN19
• BSP08A: CN3 and CN4
009-058-03
08.30.2002 FM3476
MTH08C/D board
Plastic washer
PC board brace
CR-IR347 Service Manual
[Remove]
B3x6 (x2)
FR7H3801.EPS
MC - 392
MC - 392
Advertisement
Table of Contents
