Siemens FUJI-Reader CR-IR347 Service Manual page 217

I Check/adjustment procedure
G Before side-positioning conveyor installation
Make sure that the anti-static member is brought into contact with the roller.
G After side-positioning conveyor installation
CAUTION
When turning ON the machine with the laser protective housing (cover installed over the
scanner unit) removed, be sure to turn OFF the high-voltage switch (S1) on the SCN board
(1) Turn ON the power.
(2) Start the M-Utility.
009-058-02
009-058-00
08.30.2001 FM3142
10.20.2000 FM2732 (2)
CR-IR347 Service Manual
MC - 210
MC - 210