Siemens FUJI-Reader CR-IR347 Service Manual page 268

(2) Using the test menu, record and output an image.
❍ ST
"
Japanese)
❍ HR
"
(for U.S. version)/"IMAGE FORMAT2" (for European version)
(3) Make sure that there is no jitter in the image of the border and steel rules on the output
film.
N CHECK N
Check for jitter.
If any jitter is found, refer to "10. Troubleshooting Procedures Based on Abnormal Image"
in the "Troubleshooting" volume.
(4) Compare the images of the washer for ST and HR to ensure that the image for HR is
smoother.
N CHECK N
Using a loupe, make sure that the image of the washer's curvature for HR appears
smoother than that for ST.
ST
009-058-03
08.30.2002 FM3476
" (for Japanese version)/"IMAGE FORMAT" (for versions other than
" (for Japanese version)/"BREAST, L (DSR)" or "BREAST, R (DSR)"
HR
FR7H6965.EPS
CR-IR347 Service Manual
MC - 261
MC - 261