Siemens FUJI-Reader CR-IR347 Service Manual page 252

I Check/adjustment procedure
While the side-positioning conveyor is shifted rightward (toward the smaller size end), raise
the stoppers to check that the distance between the guide plate and stopper ends is 6±1
mm.
Side-positioning conveyor
If the distance is not 6±1 mm, adjust the claw drive roller position and run the above check
again.
• Make sure that the anti-static member is brought into contact with the roller.
009-058-02
009-058-00
08.30.2001 FM3142
10.20.2000 FM2732 (2)
Side view
F
R
O
N
T
CR-IR347 Service Manual
Side-positioning
mechanism
Stoppers
6±1mm
Stopper
Roller
[Adjust] BR4x8
MC - 245
Guide plate
Roller
FR7H3172.EPS
FR7H3145.EPS
MC - 245