Canon iPF9000S Troubleshooting Manual page 50

Panel display
Code
(last 4
Large LCD
digits)
2E0B Cassette printing
is selected.
Press Load/Eject
and
remove manually
loaded sheets.
2E0C Manual printing
is selected, but a
roll is loaded.
Press Load/Eject
and
remove the roll.
Sheet printing
is selected, but
a roll is loaded.
Stop Printing
Sheet printing
is selected, but
a roll is loaded.
2E0E No Roll Feed Unit.
Turn printer off
and install roll
feed unit.
2E0F Top cover is open.
Turn off printer,
wait a while, and
turn it on again.
2E10 Ink tank cover
is open.
Turn off printer,
wait a while, and
turn it on again.
2E11 Carriage Cover is
open.
2E12 Rel lever is in
wrong position.
Turn off printer,
wait, then
turn on again.
2E14 Wrong paper size.
Check paper size
setting on computer.
Online: Print
Stop: Stop Printing
Wrong paper size.
Check paper size
setting in driver.
Online: Print
Stop: Stop Printing
Small LCD
Sheets Loaded Paper mismatch (cut sheet)
Press ↓ To Eject
Print data having a cassette print
Cassette Selectd specification has been received at the
Load Papr in Cas completion of manual feed paper pickup.
Tray Selected Paper mismatch (cut sheet)
① Print data having a manual feed print
Press OK
②Print data having a manual feed print
③Cut sheet data has been received when
Roll P Unit Roll paper unit not installed
Please Check The unit has received print data having a roll
Power On paper print specification when it had started
Again without a roll unit being connected to it.
Top Cover The top cover is abnormally open.
Please Close
Top Cover Open
Close Top Cover
Ink Tank Cover Ink tank cover error open (continued use
Close Please allowed)
Tank Cover Open The ink tank cover opened while performing
Close Please any operation, such as printing and
suctioning.
Carriage cover open error
A carriage cover open has been detected.
Faulty release lever
The state of the release lever up (released)
has been detected.
PaprSiz Mismatch Paper mismatch (size or width)
Prnt:PressOnline The paper size specified for the [Print to
Loaded Papr Diff meet the paper width] setting of the driver on
From Spfd Size receiving print data and the width of the roll
paper actually fed did not match.
Driver: Chk Papr
Size Setting
Loaded Papr Diff
From Spfd Size
Explanation/Detection sequence
specification has been received at the
completion of roll paper pickup.
specification has been received when
there is roll paper printout.
the media take-up unit is in use.
2-38
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Check the paper
that is actually
loaded on the
paper and the
paper feed
setting of the
driver.
Check the paper
that is actually
loaded on the
paper and the
paper feed setting
of the driver.
①Check the roll
unit, and
remove, install
or replace the
roll unit.
②Check IO mode
(roll unit
detection).
Check the cover.
Check the sensor
(IO mode).
Close the ink tank
cover.
Check the sensor
(IO mode).
Close the
carriage cover.
Check the sensor
(IO mode).
Push down the
release lever.
Check the
sensor.
Check the paper
that is actually
loaded on the
printer and the
paper size setting
of the driver.
Go to ★2010
（P3-12）