Canon iPF9000S Troubleshooting Manual page 34

Panel display
Code
(last 4
Large LCD
digits)
2540 Ink tank error.
to Press OK and
254C replace ink tank.
Wrong ink tank.
Replace ink tank.
Wrong ink tank.
Press OK and
replace ink tank.
2560 Ink tank error.
to Press OK and
256C replace ink tank.
2570 Ink insufficient.
to Press OK and
257C replace ink tank.
2580 Ink insufficient.
to Press OK and
258C replace ink tank.
Ink insufficient.
Replace ink tank.
Small LCD
Ink Tank Ink tank ID error
Replace BK The type of ink tank is wrong.
Ink Tank Error
Repl. Ink Tank
The last 2 digits signify applicable colors.
40:Bk, 41:Y, 42:M, 43:C, 44:PM, 45:PC, 46:MBk1,
47:MBk2, 48:GY, 49:PGY, 4A:R, 4B:B, 4C:G
Ink Tank Ink tank EEPROM error
Replace BK There is an error in tank EEPROM.
Ink Tank Error
Repl. Ink Tank
The last 2 digits signify applicable colors.
60:Bk, 61:Y, 62:M, 63:C, 64:PM, 65:PC, 66:MBk1, 67:MBk2,
68:GY, 69:PGY, 6A:R, 6B:B, 6C:G
Ink tank short on ink
A suction operation was attempted, but
there is not enough ink left in the tank for the
operation (iPF8000 series, iPF9000 series).
Reference)
About 5 mL to 40 mL of ink may have been left in the tank when
this warning occurs.
70:Bk, 71:Y, 72:M, 73:C, 74:PM, 75:PC, 76:MBk1, 77:MBk2,
78:GY, 79:PGY, 7A:R, 7B:B, 7C:G
Not Enough Ink Ink tank short on ink
↓↓↓ ↓↓↓
A suction operation was attempted, but there
Replace ink tank is not enough ink left in the tank for the
orOnline to prnt operation.
(In the small LCD, the arrow ↓ points to the
color in question.)
Reference)
About 5 mL to 40 mL of ink may have been left in the tank when
this warning occurs.
80:Bk, 81:Y, 82:M, 83:C, 84:PM, 85:PC, 86:MBk1, 87:MBk2,
88:GY, 89:PGY, 8A:R, 8B:B, 8C:G
Explanation/Detection sequence
2-22
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
①Replace the
tank.
②Failure of
remaining ink
detection
system.
(Replace the
supply unit
/check the
bundled wires.)
①Replace the
tank.
②Failure of
remaining ink
detection
system.
(Replace the
supply unit
/check the
bundled wires.)
①Replace the
tank.
②Failure of
remaining ink
detection
system.
(Replace the
supply unit
/check the
bundled wires.)
①Replace the ink.
②Failure of
remaining ink
detection
system.
(Replace the
supply unit
/check the
bundled wires.)