Canon iPF9000S Troubleshooting Manual page 18

Panel display
Code
(last 4
Large LCD
digits)
1000 Ink Level: Check
to
100C
Not much ink is
left. Prepare to
replace the ink.
100F End of paper feed.
Cannot feed
paper any more.
1010 Problem with
Printhead L/R
Chk printing results
Check printed
document.
1012 Problem with
Printhead R
Chk printing results
1013 Problem with
Printhead L
Chk printing results
Small LCD
Ink Lvl: Chk XX
Last 2 digits of error code:
End of paper feed. The limit of forced paper feeding. The media
reached to a pinchroller at feeding backfeed
media manually.
(not an error or a failure)
CheckPrintout:LR
Check Printout
CheckPrintout:R Head R non-ejection warning (double-head
model)
(Check printout/ possible to continue printing)
See 280C for detection criteria.
CheckPrintout:L Head L non-ejection warning (double-head
model)
(Check printout/ possible to continue printing)
See 280C for detection criteria.
Explanation/Detection sequence
Ink tank near-empty (continued use allowed)
The remaining volume of ink is diminishing
(below the pin check level).
(XX: Target color display)
00:Bk, 01:Y, 02:M, 03:C, 04:PM, 05:PC,
06:MBk1, 07:MBk2, 08:GY, 09:PGY, 0A:R,
0B:B, 0C:G
Head non-ejection warning (Check printout/
possible to continue printing)
See 280C for detection criteria.
2-6
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
①Replace the
tank (continued
usage
allowed).
②If the problem
persists after
the tank has
been replaced,
the remaining
ink detection
system is at
fault. (Replace
the supply unit
or check
catching wire or
connection
status of
harness.)
The message is
cleared
automatically after
displaying for
2sec.
Confirmation of
LF_PE sensor (IO
mode)
①Check image
quality. (Unless
there are
problems with
the image
quality, there is
no need to
replace the
head.)
②Replace the
head.
★If the problem
persists, go to
2F2F (P3-6).