Canon iPF9000S Troubleshooting Manual page 49

Panel display
Code
(last 4
Large LCD
digits)
2E08 Wrong paper size.
Check paper size
setting on computer.
Online: Print
Stop: Stop Printing
Wrong paper size.
Check paper size
setting in driver.
Online: Print
Stop: Stop Printing
PaprWidth Mismatch
2E09
Insufficient paper for
job
Online: Print
Stop: Stop Printing
Load/Eject: Change
Paper
2E0A Roll printing is
selected, but sheets
are loaded.
Press Load/Eject
and
remove the sheets.
Roll printing is
selected, but manual
paper is loaded.
Roll printing is
selected, but sheets
are loaded.
Press OK,
remove the sheets,
and load a roll.
Roll printing is
selected, but sheets
are loaded.
OK:Eject Sheets
Stop:Stop Printing
Roll printing is
selected, but sheets
are loaded.
Small LCD
PaprSiz Mismatch Paper mismatch (size) (roll paper)
Prnt:PressOnline The width of data and that of the actually
Loaded Papr Diff loaded paper do not match.
From Spfd Size
Driver: Chk Papr
Size Setting
Loaded Papr Diff
From Spfd Size
Roll Paper Short on roll paper
Please Replace All of the following conditions have been met
Paper Level Low at the start of printing:
・[ON] has been selected for [Remaining Roll
Replace Paper
・Among the paper size settings coded in the
Sheets Loaded Paper mismatch (roll paper)
Press ↓ To Eject
Print data having a roll paper print
Roll Selected specification has been received at the
Load Roll completion of manual feed paper pickup.
Explanation/Detection sequence
Paper Detection].
print data, the paper length exceeds the
remaining length of roll paper.
2-37
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Check the paper
that is actually
loaded on the
printer and the
paper size setting
of the driver.
Go to ★2010
(P3-12).
Replace the roll
paper.
Check the paper
that is actually
loaded on the
paper and the
paper feed
setting of the
driver.