Canon iPF9000S Troubleshooting Manual page 32

Panel display
Code
(last 4
Large LCD
digits)
2407 Borderless printng
not possible. Paper
stretched or shrank.
Confirm usage cond.
of the paper.
2408 Borderless printng
not possible. Check
supported paper.
Bordless Printing
not possible. Lift
release lever and
reload the paper.
2409 Paper position is not
suitable for
borderless printing.
Check paper
position.
Print to normal
printing.
Stop printing.
240A Borderless printing is
not possible. Check
supported paper.
Check paper
position.
Print to normal
printing.
Stop printing.
Explanation/Detection sequence
Small LCD
It occurs when all of the following
conditions are met at start of printing.
・Borderless printing data has been
received.
・Roll paper has been loaded, and its
paper width and edge position
recognized at loading are within the
supported range of borderless printing.
・As a result of right/left side edge
detection after start of print processing, it
was detected as beyond the supported
range of borderless printing.
At the start of borderless printing, roll
paper whose size doesn't support
borderless printing has been loaded.
Invalid paper loading position (suspended
job/ borderless printing)
All of the following conditions were met.
・Borderless printing data has been
received.
・Roll paper whose paper loading position
is not suitable for borderless printing has
been loaded.
・The right or left edge of roll paper is
more than 1mm off the prescribed
position of the pre-ejection opening.
Borderless printing is not possible
(suspended job/ unsupported size). All of
the following conditions are met.
・Borderless printing data has been
received.
・Roll paper not supporting borderless
printing has been loaded.
2-20
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure or
tool)
Reset /replace the roll
paper.
Confirm and explain
usage environment.
Replace with
appropriate paper.
Reload/ replace the
roll paper.
Go to ★2010
(P3-12).
Check roll paper.
1) Select「
Normal
printing.(No
borderless printing)」
and enforce
printing.Borderless
print setting is
ignored. Print with
default
margin.Default
margin depends on
selected feeding
trays and media
type.
2) Select "Stop
printing" or press
"stop button"to stop
printing.
3) Select "replace
printing" or release
releasing lever.