Canon iPF9000S Troubleshooting Manual page 113

Flow 2
Due to an Illustrator bitmap print processing
problem, images are delivered from Illustrator, with
some parts missing.
Flow 3
Appearing on the panel
- GL2:W0903
- GL2:W0501
Appearing on the panel
- GL2:W0504
Actions to be taken by probable cause are listed below.
Flow 4
Where a large image is pasted, for example, the problem can be avoided by cutting down the workload
Change the FineZoom
setting to [Yes]
Lower high print quality
setting
Reduce the size of image
pasted
Expand PC memory
Images transmitted from Windows found defective when in ICM mode (Windows color matching)
Check [Application Color
Matching Priority].
Missing parts in some data if high-speed rendering (high-speed rendering engine) is used
Uncheck [Fast Graphic
Process]
Some application may suffer degraded print quality if FineZoom is turned on.
Set FineZoom to [No].
Print jobs sometimes time out after processing on an underpowered PC
Spool all pages before
printing
Size of vector data exceeding the
processing capacity
Unknown command encountered
In the printer driver properties dialog box, choose [Layout] ⇒ [Special
Settings] and change [Set FineZoom] to [Yes]
In the printer driver properties dialog box, choose [Main] ⇒ [Advanced
Settings] and change [Print Quality] to [Draft]
Reduce the image resolution to 2,000,000 pixels or below using an application
such as Photoshop
Add to PC memory
In the printer driver properties dialog box, choose [Layout] ⇒ [Special
Settings] and check [Application Color Matching Priority]
In the printer driver properties dialog box, choose [Layout] ⇒ [Special
Settings] and uncheck [Fast Graphic Process]
In the printer driver properties dialog box, choose [Layout] ⇒ [Special Settings]
and change [Set FineZoom] to [No]
And uncheck [Open Preview When Print Job Starts], [Page Layout], and
[Watermark].
In [Advanced Settings] tab in the printer driver properties dialog box, select
[Spool all pages of data and transmit the print data to the printer] to spool the
print document to speed up the time the program takes processing
Chapter 3 More Sophisticated Fault Isolation Tasks
Uncheck [Bitmap print] in the Illustrator Print dialog box
- Cut the vector data
- Use HP RTL data for operability On The Fly
Check and fix data before printing
3-37