Configuring The Process View - ABB SM3000 User Manual

SM3000
Multipoint Videographic Recorder

6.5.4 Configuring the Process View

Alarm Alarm Trip
Tag Level
Totalizer Tag Totalizer
Name
82
Channel Long Tag Name (Short Tag Name)
Max Min
Value
Values since last Totalizer Reset or Totalizer wrap.
Updated only if the Totalizer is Enabled and Running.
Average
Set to 'On' to enable the operator to display the Process view.
Select the menu items to be accessible from the Process view.
Message select enable
Enables the operator to activate one of 24 pre-configured
messages or a user-defined message.
Alarm acknowledge enable
Enables the Operator to acknowledge any alarms associated
with the current group.
Totalizer reset enable
Enables the Operator to reset the totalizers on any or all
channels.
Totalizer stop/go enable
Enables the Operator to stop and start totalizers on any or all
channels.
Note. Menu items that are not enabled are greyed-out in the
Process view menu.
6 Configuration
IM/SM3000–EN Rev. L