ABB SM3000 User Manual page 35

SM3000
Multipoint Videographic Recorder
IM/SM3000–EN Rev. L
Reset the Maximum and Minimum value markers on one or all channels to the current
value.
Notes.

These Maximum and Minimum values are for display purposes only. They are not
saved or archived and are not connected to the Totalizer Maximum and Minimum
Values displayed in the Process View.

These Maximum and Minimum values are reset whenever the current configuration
has been changed or is re-saved.
Group Overview is not group specific therefore to acknowledge a particular alarm, use
the , and keys to select the group, highlight the alarm in the sub-sub-menu
and press the key.
Note. In Group Overview, active alarms are identified by a flashing red group tag field.
Acknowledged alarms are identified by a steady red group tag field – see Fig. 4.9, page
31.
To acknowledge all active alarms in all process groups simultaneously, select 'All' and
press the key.
To acknowledge all active alarms in the selected process group simultaneously, select
'All' and press the key.
Note. If an alarm in another process group is active, the Global Alarm status icon (
continues to be displayed in the status bar. If an active alarm in another process group is
unacknowledged, the icon is surrounded by a red flashing border (
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
4 Operation
)
).
33