Installation; Siting - ABB SM3000 User Manual

SM3000
Multipoint Videographic Recorder

7 Installation

EC Directive 89/336/EEC
In order to meet the requirements of EC Directive
89/336/EEC for EMC regulations, this product must not be
used in a non-industrial environment.
End of Life Disposal

The instrument contains a small lithium battery which
should be removed and disposed of responsibly in
accordance with local environmental regulations.

The remainder of the instrument does not contain any
substance that will cause undue harm to the
environment and must be disposed of in accordance
with the Directive on Waste Electrical and Electronic
Equipment (WEEE). It must not be disposed of in
Municipal Waste Collection.
Cleaning
Clean only the front panel, using warm water and a mild
detergent.

7.1 Siting

Keep distance
to a minimum
A – Close to Sensors
B – At Eye-level Location
C – Avoid Vibration
Fig. 7.1 General Requirements
IM/SM3000–EN Rev. L
Sensors
0°C
(32°F)
Min.
A – Within Temperature Limits
0 to 95% RH
B – Within Humidity Limits
IP66 / NEMA 4X front
IP40 rear (with extension)
IP20 rear (without extension)
C – Environmental Limits
+
D – Use Screened Cable
Fig. 7.2 Environmental Limits
Warning. Select a location away from strong electrical and
magnetic fields. If this is not possible, particularly in
applications where mobile communications equipment is
expected to be used, screened cables within earthed metal
conduit must be used.
7 Installation
50°C
(122°F)
Max.
109