Password Entry - ABB SM3000 User Manual

SM3000
Multipoint Videographic Recorder

5.3 Password Entry

42
Enter Password
1. Select the required character using the
2. Add the selected character to the password string using the
Note. For security, all characters are displayed as ''.
3. Repeat 1 and 2 until all characters have been entered.
4. Highlight the 'OK' button using the
Change Password
Select 'Change Password' using the
1. Highlight the Edit Button (
display the character entry box.
2. Enter the old password using the
'OK' button and press
3. Enter the new password using the same procedure as for the old password.
4. Enter the new password again to confirm it.
5. Highlight the 'OK' button and press
Password change successful.
Note. If the key is pressed at any stage or 'OK' is selected before the new
password is confirmed, the password change operation is cancelled and the following
message is displayed:
Password Expired
Passwords can be configured to expire at pre-determined intervals. If a password is time
expired, this screen is displayed automatically. Enter a new password as described
above.
, , , and
, , , and
, , , and
) using the and
, , , and
.
.
5 Setup
keys.
key.
keys and press .
keys and press .
keys and press to
keys. Highlight the
IM/SM3000–EN Rev. L